- Description
- In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data
In case the non-paged data of a SKB carries protocol header and protocol
payload to be transmitted on a certain platform that the DMA AXI address
width is configured to 40-bit/48-bit, or the size of the non-paged data
is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI
address width is configured to 32-bit, then this SKB requires at least
two DMA transmit descriptors to serve it.
For example, three descriptors are allocated to split one DMA buffer
mapped from one piece of non-paged data:
dma_desc[N + 0],
dma_desc[N + 1],
dma_desc[N + 2].
Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold
extra information to be reused in stmmac_tx_clean():
tx_q->tx_skbuff_dma[N + 0],
tx_q->tx_skbuff_dma[N + 1],
tx_q->tx_skbuff_dma[N + 2].
Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer
address returned by DMA mapping call. stmmac_tx_clean() will try to
unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf
is a valid buffer address.
The expected behavior that saves DMA buffer address of this non-paged
data to tx_q->tx_skbuff_dma[entry].buf is:
tx_q->tx_skbuff_dma[N + 0].buf = NULL;
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single();
Unfortunately, the current code misbehaves like this:
tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single();
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = NULL;
On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the
DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address
obviously, then the DMA buffer will be unmapped immediately.
There may be a rare case that the DMA engine does not finish the
pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go
horribly wrong, DMA is going to access a unmapped/unreferenced memory
region, corrupted data will be transmited or iommu fault will be
triggered :(
In contrast, the for-loop that maps SKB fragments behaves perfectly
as expected, and that is how the driver should do for both non-paged
data and paged frags actually.
This patch corrects DMA map/unmap sequences by fixing the array index
for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address.
Tested and verified on DWXGMAC CORE 3.20a
- Source
- 416baaa9-dc9f-4396-8d5f-8c081fb06d67
- NVD status
- Analyzed
[
{
"nodes": [
{
"negate": false,
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "F7B2EF6A-A80D-4A30-B1E9-7DBA47DFA518",
"versionEndExcluding": "5.15.171",
"versionStartIncluding": "4.7"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "43EFDC15-E4D4-4F1E-B70D-62F0854BFDF3",
"versionEndExcluding": "6.1.116",
"versionStartIncluding": "5.16"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "75088E5E-2400-4D20-915F-7A65C55D9CCD",
"versionEndExcluding": "6.6.60",
"versionStartIncluding": "6.2"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "E96F53A4-5E87-4A70-BD9A-BC327828D57F",
"versionEndExcluding": "6.11.7",
"versionStartIncluding": "6.7"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc1:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "7F361E1D-580F-4A2D-A509-7615F73167A1"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc2:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "925478D0-3E3D-4E6F-ACD5-09F28D5DF82C"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc3:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "3C95E234-D335-4B6C-96BF-E2CEBD8654ED"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc4:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "E0F717D8-3014-4F84-8086-0124B2111379"
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc5:*:*:*:*:*:*",
"vulnerable": true,
"matchCriteriaId": "24DBE6C7-2AAE-4818-AED2-E131F153D2FA"
}
],
"operator": "OR"
}
]
}
]